Duurzaamheid
SHOP REVIEWS
(9.5 uit 21.700 reviews)
Nederlands Deutsch English

  • Not satisfied, money back
  • 30 days return
  • Excellent service
  • Safe ordering
  • Own stock
  • Track & Trace shipping
  • Privacy guaranteed
  • Factory warranty
  • Know-how present
  • We speak English


    Trustpilot

Brake pads Ferodo FDB2048 ST sinter front advice

(EAN: 5016687192773 / ID: 1475)
9.6
(12 reviews)
MSRP:
40,95
our price:
34,95
you save:
6,00 (15.00%)
Delivery : in stock
+
Ferodo
Play video:
Video

Brake pads Ferodo FDB2048 ST sinter front advice

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Sintered brake pads for the motorcycle type Ferodo FDB 2048 ST. Ferodo brake pads have proven themselves in racing, among other things, that they are of very high quality at a competitive price.

Please note: for the FDB2048, the motorcycle often has different brake pads on the left and right (right is FDB2049).

The brake pads are available in various types of materials for most motorcycles. In general, the sintered variant is taken. This is because of the excellent braking properties and wear resistance of the brake pads. Organic brake pads are a bit softer and are better suited to older bikes with smaller discs and less efficient calipers (compared to today's).

Note: Item concerns a set of brake pads for 1 brake caliper/brake disc. For example, keep this in mind if you have 2 brake discs at the front and ordered brake pads for the front (then order 2 x). Please note: for certain Suzuki and Kawasaki models, it will only fit the left brake caliper. On the right you need the FDB2049. Check the information behind your motorcycle in the overview below to see if this applies to your motorcycle .

When replacing the brake pads, it is a good time to immediately replace the brake fluid (see bottom of page).

Fits on the following motorcycle:

Click on plus to see the models and years:
Kawasaki
+
Suzuki
+

Reviews (12)

9.6 9.6 average of 12 reviews
We guarantee the authenticity of the reviews because only customers who have actually bought the product can write a review.
by Cor Pxxxxxxx (automatically translated from Dutch) 05/05/2022
Fast delivery
by Vincent Exxxx (automatically translated from Dutch) 02/21/2021
Good description about the product and the difference between sintered and organic brake pads. Also a good reference for the other brake side. Everything received neatly.

Applied / used on: Suzuki DR650 bouwjaar 2010
by V. Vxx xxx xxxxxx (automatically translated from Dutch) 04/22/2020
Perfect, I have been well advised by mpartz. Easily found the brake pads for my motorcycle type.
by Rob Vxxxxxxx (automatically translated from Dutch) 08/28/2019
In my ZR7 of 1999, the right and left blocks are indeed different. Delivered quickly and work great.
by Rau Rxxx (automatically translated from Dutch) 03/01/2019
Fast delivery

Applied / used on: Suzuki SV650 bouwjaar niet aangegeven
by Roel Vxxxxxxx (automatically translated from Dutch) 01/09/2019
Easy to install and work great.

Applied / used on: Kawasaki Z750 bouwjaar 2004
by Frank Bxxxxxxxxx (automatically translated from Dutch) 09/14/2018
<p> This Power Commander III is suitable for the BMW F 800 / F 800 ST 2007-2008. Normally an motorcycle is adjusted to meet the environmental requirements. However, this does not mean that it is the most optimal adjustment in terms of power and throttle response. This problem is solved with the Power Commander III. This will give your motorcycle more power and a higher torque. This means maximum power and a smooth throttle response. Especially in the 2nd and 3rd gear of many modern motorcycles there is a lot to be gained. Since the entire air-fuel ratio is programmed, a Power Commander is needed. This allows the mixture to be programmed as desired. <br></p><h2> Mounting BMW Power commander </h2><p> Mounting the Power Commander is relatively easy and in almost all cases occurs on existing connectors of your motorcycle.No further adjustments are required in the cabling itself and the Power Commander can always be disassembled. In short, the power commander is plug &amp; play and can be executed with simple technical key knowledge. </p><h2> Right program for BMW </h2><p> We can supply the Powercommander 3 USB and the Powercommander V standard with a specific schedule / mapping (also called software) for your motorcycle. Please indicate in the remark field with your order (occasion when shipping method) which exhaust / damper is fitted and / or air filter (even if this is original). We have access to a very large collection of mappings, with which your motorcycle is 95% well adjusted with a mapping that is the same or equivalent to the information provided.In short Plug-and-play (and that is a huge improvement of the original setting). </p>

Applied / used on: Suzuki DL1000 V-Strom bouwjaar 2006
by Frans Mxxxxxxx (automatically translated from Dutch) 07/28/2017
Delivered quickly

Applied / used on: Suzuki DL650 V-Strom bouwjaar 2010
by Hennie Mxxxxxxxxx (automatically translated from Dutch) 07/25/2017
Soups service
by Peter Jxxxxxx (automatically translated from Dutch) 04/03/2017
Fast delivery and slows again as the best ...
Show all reviews