Chaincutter and Reviting Tool DID KM500R motorcycle chain
The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English. Chain breaker and chain punch original from DID type KM500R for breaking a chain and riveting hollow rivet links from DID (not the old KM500 type as is sometimes offered, with which not all DID chains can be riveted). The use of a spindle creates a precise and solid attachment, without the use of a hammer. Choosing DID tools guarantees quality tools. This set comes with a sturdy metal storage box. At other web shops this is sometimes supplied with a plastic box that breaks quickly.
This punch is suitable for DID chains of types 520, 525, 50 (= 530), and 532, which require a lock of type VX, ZVM-X, RJ, FJ, XI, ZM or PL. Can also be used for riveting a ZJ type DID lock on a 520, 525, 50 (= 530) or 532 type chain.
It is necessary to determine in advance whether the chain lock is the correct one for the chain, because each chain uses a specific lock. Therefore, only use DID latch closures.
An imitation of this tool is shown in the video. The idea of how it works is identical. The quality (in particular the hardness of the pin is many times higher than the original set). The same applies to the dimensional stability of the tool, which is much higher (due to torsional forces). We had a cheaper comparable product in the past, but we often received complaints that the pin broke off. You should always make sure that the pin is positioned correctly.
Remark:
We initially also had a cheaper Chinese imitation in our range (offered elsewhere for around ? 60.00), but we stopped using this. We received too many complaints about poorly functioning tools, inability to sound and breaking of the tool or pin, etc. This shows once again that good tools cost money.