Fork Shaft Seals and dustcaps 43x54x11

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Front fork seals including dust caps for motorcycle of the Tourmax brand. Delivery is a set of 2 pieces. This brand stands for perfect fit and very strong wear resistance through the use of unique natural material (XNBR). Due to the materials used and precise fit, these front fork seals more than meet the requirements set by the motorcycle brands. The sizes of the seal rings for the front fork of the motorcycle are: 43x54x11.

Delivery:
- Set of 2 seal rings (both with 1 clamping spring)
- Set of 2 pcs dust caps

Tip:
- Consider also ordering front fork oil (see bottom of the page).
- Leakage from the front fork seals is usually caused by sand, dust and natural wear and tear. If the front fork seal leaks, you will see oil on the fork legs that can end up on your disc brake, but the spring ring will also no longer function as well. Before you finally place the new seals, it is important that you also check the front fork for wear, otherwise the problem may remain.

Reviews (7)

8.6 average of 7 reviews
We guarantee the authenticity of the reviews because only customers who have actually bought the product can write a review.

by Peter Bxxxxxxx (automatically translated from Dutch)

06/08/2020


great fit

by D Vxxxxx (automatically translated from Dutch)

04/04/2019


Absolute bad; poor seal of the seal and too large dust covers Applied / used on: Triumph Tiger 800 2012

by Cees Kxxxxxx (automatically translated from Dutch)

09/05/2018

<p> Brake disc rear is suitable for the _YMM_. The brake disc is from the famous brand Brembo. You are assured of high quality at a good price. The Brembo brake discs meet the requirements that the motorcycle manufacturers set for this. </p><h2> Mounting brake discs </h2><p> Mounting is fairly simple, but needs to be done professionally (after all, it is your brakes). When fitting, it is advisable to iron the screws slightly with ceramic grease so that the screws do not eat tightly. It is very advisable to immediately replace your brake pads as old brake pads have an old wear pattern of the old brake disc. </p><p> The picture is for illustration. A disc brake will be supplied for your motor specifically.The design of the center piece may differ from the original design. It is therefore advisable to replace both discs with 2 disc brakes on the front to prevent color difference and design difference. </p><p> The price and delivery is 1 brake disc. </p>

Applied / used on: Honda CBR1100XX BlackBird bouwjaar 1997

by Patrick Vxx xxxxxx (automatically translated from Dutch)

11/29/2017


Have they already been assembled very satisfied fit perfectly good price

by Nathaniel Mxxxxxxx (automatically translated from Dutch)

08/08/2017


Nice on time and the good stuff delivered and sure to report that t also has a good price ..

by Carlo Dx xxxxxx (automatically translated from Dutch)

07/14/2017


All items always come fast, good quality for a competitive price. Nice communication and good service. Parts fit fine. Applied / used on: Kawasaki ZX-10R bouwjaar 2007

Honda	CBR600F	1999 - 2013
Honda	CBR1000RR	2004 - 2014
Honda	XL1000V Varadero	1998 - 2013
Honda	CB1100SF X11 X-Eleven	1999 - 2001
Honda	CBR1100XX BlackBird	1996 - 2008
Honda	CB1300 X-4	1997 - 1999
Kawasaki	KLV1000 Versys	2004 - 2006
Suzuki	GSX-R750	1988 - 1999
Suzuki	GSX750	1998 - 2000
Suzuki	RF900R	1993 - 1998
Suzuki	DL1000 V-Strom	2001 - 2009
Suzuki	GSX-R1000	2009 - 2018
Suzuki	GSF1200 Bandit	1995 - 2006
Suzuki	GSX1200	1999 - 2002
Yamaha	XVZ1300 Royal Star	1996 - 2001
Yamaha	XV1600 Wildstar	1998 - 2002
Yamaha	XV1700 Road Star Warrior	2002 - 2004

Fork Shaft Seals and dustcaps 43x54x11

Fork Shaft Seals and dustcaps 43x54x11

Fits on the following motorcycle:

Reviews (7)