Gipro G2 Gear Indicator rot HealTech X, ATRE, DS, DT

Fits on the following motorcycle:

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Gipro from HealTech gear indicator is the standard in the field of gear indicators. This concerns the new G2 gear indicator version with touch control for your motorcycle with a red display. The Gipro is easily connected via the supplied cable set. Various specific cables are available for this purpose as well as a universal cable set. You can order the right set for your motorcycle via the selector below. There are 3 variants of GiPro: X/XT, DS/DT and the ATRE. Each is specifically suitable for the indicated motorcycle with the associated cable set. These variants are not interchangeable (so you cannot place an X-type on an motorcycle for which an ATRE is indicated, for example).

Delivery includes the unit and the necessary cable set.

Search via our motorcycle list (at the very bottom of this page) or via the selector below (not all motorcycles have yet been linked to our webshop). Please note: a specific version is not available for all motorcycles. Check below whether a Gipro X, Gipro DS or Gipro ATRE applies to your motorcycle. If no specific version is indicated for your motorcycle, you can possibly take the universal one: GPXT + GPX-WSS.

General specifications Gipro

• Color of the display is red
• Self-learning and easy installation.
• Fast and precise, connects to the original plugs (except the U0X cable variants, which are universal sets)
• A switched plus connection (12V) must be made
• Fast 0.4 second response to gear changes after clutch release. No error indication if, for example, only the clutch is pressed without shifting gears.
• Nice compact size: 30 x 18 x 15mm
• Good, clear display that is also clearly visible in sunlight
• The display is available in red, yellow, green, blue and white
• Good, clear display that is also clearly visible in sunlight
• Auto-standby, switches itself off and on again
• Very robust and waterproof
• NOTE : types with WSS, U01 and U02 are universal units. This means that the connections must be made yourself (no plug-and-play). Technical knowledge is necessary to make the correct connections (correct signal cables are required from the wiring harness).

Some specifications Gipro ATRE

• 2 in 1 function: gear indicator and Advanced Time Retard Eliminisator (ATRE)
• Plug-n-go, no programming required
• A switched plus connection (12V) must be made
• Works directly on the gear position sensor (TPS)
• Better throttle response in first to third gear and no limited top speed
• Also works perfectly in combination with Powercommander, Juicebox, TFI, Speedohealer, Teka4 etc.

Some specifications Gipro DT/DS

• 1 plug connection to the ECU and therefore very easy installation.
• A switched plus connection (12V) must be made
• Plug-n-go, no programming required

In short: the world's most compact gear indicator.