Brakepads motorcycle rear of Brembo

Brakepads motorcycle rear of Brembo

Brakepads motorcycle rear with extra filtering on the brand Brembo

Brembo

Brembo is the standard in terms of brake pads, brake discs, brake calipers, etc. Since 1961, Brembo develops and manufactures Brembo brake components. The company was originally established by CC component pads

CC ie Carbon Ceramic is a further development of the so-called organic pads. These pads have been prepared to have a good braking with a long lead time. These pads are ideal for touring bikes and choppers.

SA or SP component pads

The SA or SP component pads are sintered pads. Here, the SA brake pads suitable for the brake calipers on the front and the SP pads are suitable for the rear brake calipers. Gestinterde pads are actually the most common and gedaviseerde pads. They provide excellent braking capacity at a good life.These pads are mainly used for sportier driving. Think of sports bikes and naked bikes (which is now not inferior in terms of assets).

SD or SX component pads

Do you have an enduro, supermoto and off-road, then SD or SX advise pads. These are put together so that they have optimum braking in water, mud and sand. SD pads are more for the cross, however, use and SX are typically used for street use. Think of the Supermoto or if you have an enduro and mainly used it on the road.

Brakepads motorcycle rear

Good rear brakes are a very important part of the safety on your motorcycle. That is why we have chosen the renowned Ferodo brand. Ferodo is a manufacturer of brake pads for motorcycles and is also used in racing. Through years of experience, an excellent mix has been found between good braking power and service life, especially with the sintered brake pads.

Replacing brake pads

Replacing brake pads is a job that can be done with little technical knowledge, but it must be done carefully. Use the correct tools for this. In addition, it is VERY IMPORTANT that everything is properly tightened and tightened to the torques (Nm) specified by the manufacturer. So when in doubt, it is always advisable to have it installed at a motorcycle shop.

Correct rear brake pads

There are mainly 2 types of rear brake pads for street use, namely organic and sintered pads. The organic brake pads have a longer service life, but provide less braking power. The sintered brake pads form a good combination between service life and braking power. For normal street use, the sintered brake pads are therefore recommended for use with the rear brake.

To find brake pads that are suitable for your motorcycle, you can use the selector to search our webshop. If no brake pad is found there, you can also search directly in the Ferodo database. You can then find the right brake pads in our webshop based on the type number.