Motorcycle Maintenance of K&N

Motorcycle Maintenance of K&N

Motorcycle Maintenance with extra filtering on the brand K&N

K&N

K & N air filter is a wise choice for your motorcycle. Placing a K & N air filter is simple: remove the old original paper air filter and replace it with the K & N air filter. No further adjustments are necessary to your motorcycle.

K & N air filters advantages:

• Better air flow through the larger surface
• Filter material is cotton (original paper)
• Longer life
• Filter can be cleaned and reused (filter lasts longer than the motorcycle, so never buy a new one)
• Because of the shape, the pressure drop of the air through-flow reduced to a minimum

K & N mount on your motorcycle:

The installation of a K & N air filter on your motorcycle with little technical knowledge.It is a matter of exchange of the original air filter at an air filter of K & N. Most of the work will rather sit removal and installation of other things to get to the air filter. If you are unfamiliar with this, it earned the recommendation to use technical documentation such as a workshop manual. For optimum performance with a K & N filter it may be necessary to adjust your bike.

Please note that the air filter is already oiled and there is no need to spray in the first and is immediately ready for use.

Motorcycle Maintenance

It is popular to argue your motor. Maintenance themselves Some jobs lend themselves perfectly for when you're a bit handy. We offer quality replacement products that you can have in the maintenance, like an oil filter, air filter, spark plugs, chain set needed. In all of these components can search for your brand, type and year of your motorcycle. We also have a number of manufacturers, the selector of those manufacturers listed in our shop, so you can easily search in there.

Perform maintenance

Care when performing maintenance on your motorcycle that you are working on a clean floor. Should fall to the ground, parts are easier to find (think small screws or clips) it back and also prevents immediately is dirt.Also use good fit tools. Especially with Phillips screws it is important that you use a proper fitting screwdriver. You will not be the first to know to turn his head piece. Use in reassembling motorcycle possibly copper grease on the threads of the screw. Mn in the cylinder head or metal / aluminum compounds, this is recommended.

Finding products for maintenance of your motorcycle

Using the selector you can find specific products for your motorcycle Note:. Universal products are no longer being displayed (otherwise you would get hundreds of articles).