Oil drain plug sealing ring several sizes
Oil drain plug sealing ring several sizes
Drain plug gasket ring for the crankcase with an inner diameter of 10mm, 12mm, 14mm, 16m, 18mm, 20mm, 22mm and 24mm (8 oil seals in different sizes are supplied). We have put together a set of 8 sizes of copper rings that are most commonly used due to the limited costs of these seals. It would be more expensive if you ordered the wrong one and had to order it again. In almost all cases, 1 sealing ring fits for the oil drain plug and you have the other sealing rings left over. We do not have this specification per motorcycle type and cannot advise you on this. Unfortunately, there is no guarantee that there will always be a suitable gasket for every motorcycle. This set is not suitable for Vespa and Piaggio, because they use a rubber seal.
Specifications:
- Material: copper and aluminum
- 10x20mm, 12x20mm, 14x22mm, 16x22mm, 18x24mm, 20x26mm, 22x28mm, 24x30mm
- Thickness 1.5mm
If you know the size, you can add this as a comment to your order and we will deliver the gasket ring free of charge (ordering a set is then not necessary and applies to a standard size from this set). Only in combination with an oil filter or oil.
Reviews (189)
We guarantee the authenticity of the reviews because only customers who have actually bought the product can write a review.
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||