Progressieve frontvering Kawasaki EN500 Vulcan 93-97
- Ask a question
- Send email when item is available
Progressieve frontvering Kawasaki EN500 Vulcan 93-97
Fits on the following motorcycle:
Kawasaki | EN500 Vulcan |
| |||
Product is suitable for the Kawasaki EN500 Vulcan (check year from the EN500 Vulcan below in the motorcycle-list). Standard front suspension of motorcycles is known to be too soft at the factory. This means that when the front fork is loaded, it can cause the front fork to tip through. To prevent this, the original springs in the front fork of your motorcycle can be replaced with progressive suspension ProMoto from the well-known German brand Wilbers. Progressive suspension means that the suspension becomes more rigid as it is pushed further. This prevents undesired spreading of the suspension.
Specifications:
- Suitable for: Kawasaki EN 500 year range 93-97
- Required oil: 15 (1 L) (= viscosity and number of liters needed)
- Height of air chamber: 150mm *
- Type: Progressive suspension
Note: is delivered without oil.See article below to order with the viscosity as indicated.
* = The air chamber is measured with the front fork fully-insulated and without front fork springs.