| Displaying 51 to 60 (of 17362 reviews) |
Result Pages: |
|
|
| Airfilter HiFlo HFA7914 by Rick Hxxxxxxx (automatically translated from Dutch) |
Date Added: Wednesday 13 March, 2024 |
|
 |
 |
 |
Ordered this item together with all oils and filters for the annual service R1200GSA, has been going well for years, fast service, top
Applied / used on: BMW R1200GS bouwjaar 2010 |
|
|
|
|
|
| Cruise Control by Wendy Mxxxxx (automatically translated from Dutch) |
Date Added: Wednesday 13 March, 2024 |
|
|
 |
|
It takes some getting used to, but for long distances it is nice not to have to keep the gas open. Works on my 1150gs with handguards and the Oxford Touring Pro heated grips.
Applied / used on: BMW R1150GS bouwjaar 2000 |
|
|
|
|
|
|
|
 |
 |
|
Breaks too quickly when tightening, despite the torque wrench. Response from mPartz: It is important to adhere to the tightening torque of 12Nm (see description) and not the tightening torque of the original drain plug since it is a hollow aluminum drain screw. Clamping is done by the supplied sealing ring. |
|
|
|
|
|
|
|
 |
|
|
It's not worth it. The one I had was defective. Both said there was no dot 4 through it, which caused pressure to build up and the tube to fall off, covering everything. Snakes were also very short for beauty. All in all, just buying a transparent tube of half a meter would be more useful. Response from mPartz: The mechanical part works with a fairly strong spring that presses against the ball. This is also necessary because the brake pump puts a lot of pressure. The arrow on the bleeder must point away from the brake caliper. It is important to place the hose sufficiently over the bleed nipple and use the clamps supplied. This prevents the vent hose from popping off. |
|
|
|
|
|
|
|
 |
|
|
Ideal for making a switched 12v connection, without having to connect to existing cabling |
|
|
|
|
|
|
|
 |
|
|
about 4cm seam was loose Response mPartz: That is not the intention. Just let us know if you would like to receive a new one. |
|
|
|
|
|
| Oil filter wrench by Remon Vxxxxxxx (automatically translated from Dutch) |
Date Added: Monday 11 March, 2024 |
|
|
 |
|
|
Exactly as described, this type of cap for my type of oil filter. Only downside to the 3/8 connection, which meant I first had to get an adapter to my 1/2 tool set. For the rest, neatly packaged and delivered quickly. |
|
|
|
|
|
|
|
 |
 |
Excellent oil, 4 liters is JUST enough (right at the top of the red circle) so you can fill in the entire can. If you want some reserves on hand, you should order this with your BMW R1250gs
Applied / used on: BMW R1250GS bouwjaar niet aangegeven - Viscositeit: 5W-40 |
|
|
|
|
|
|
|
 |
|
|
Very satisfied, installation was easy to do yourself (fortunately I don't have 2 left hands ;) ) power wires from the set were more than sufficient in length, so no fiddling with extending wires, etc. All lights are nice and bright, you are clearly visible on the road! Everything is included for installation, just like a booklet (not Dutch). I connected the wiring myself with waterproof solder sleeves and shrink tubing, so I did not neatly conceal the supplied connection material and wiring. |
|
|
|
|
|
|
|
 |
|
|
The tank of a motorcycle/oldtimer that had stood still for a long time was very rusty on the inside. Followed the manual (be sure to download it) on the Tank Cure site and got a very good result. There is now a nice smooth layer in the tank and it should be resistant to 10% ethanol. Chosen Tank Cure after reading various experiences. |
|
|
|
|
|
| Displaying 51 to 60 (of 17362 reviews) |
Result Pages: |
|
|
2% (417 reviews)
1% (196 reviews)