−

Tankpad Arachnid Spine black

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Tank pad for your motorcycle, type Arachnid Spine. Color is black. Tank pad is thick (3D) and provides protection against scratches on your tank from your motorcycle pants or motorcycle jacket.

Dimensions of the tank pad are 160x220mm.

Applying tank pad

For a good adhesive result (applies to every sticker), you must ensure that the room is at least 15 degrees and not damp (as is often the case in a shed or garage). For example, if you put the tank in your living room to warm up, leave it for at least 1 day since you initially get condensation and that needs a while to evaporate.

If the tank pad is glued on a curve, heat the tank suit with a hair dryer after sticking. If necessary, stick the corners well with adhesive tape for 24 hours, so that the glue has the chance to adhere well. Remove this tape after 24 hours.

Do you still have that corners come off, take a clear photo and email it to us with the issue. Never pull the tank pad off, because then it can no longer be used.

Reviews (1)

4 average of 1 reviews
We guarantee the authenticity of the reviews because only customers who have actually bought the product can write a review.

by Sebas Rxxxxxxxxxxxx (automatically translated from Dutch)

03/17/2016


Nice thick tankpad. Has unfortunately difficult to stick on round surfaces. Themselves have yet to secure a two component adhesive. MPartz response: Ensure that the ambient temperature above 15 degrees (including the tank itself) to prevent condensation and the best adhesive result. If you need to stick around curves, it is advisable to warm up with a hairdryer in the tankpad.