Tankpad BMW S1000RR black stripes
- Ask a question
- Send email when item is available
- Barcode manufacturer: TB015KR
Tankpad BMW S1000RR black stripes
Tankpad S1000RR from MotoGrafix has an excellent finish in special 3D-gel (does not yellow) and a beautiful design. Height is 220mm and width is 170mm. It is a nice eye-catcher for your motorcycle, while it immediately protects the paint of the tank against scratches from your motorcycle pants or motorcycle jacket.
Applying tank pad
For a good adhesive result (applies to every sticker), you must ensure that the room is at least 15 degrees and not damp (as is often the case in a shed or garage). For example, if you put the tank in your living room to warm up, leave it for at least 1 day since you initially get condensation and that needs a while to evaporate.
If the tank pad is glued on a curve, heat the tank suit with a hair dryer after sticking. If necessary, stick the corners well with adhesive tape for 24 hours, so that the glue has the chance to adhere well. Remove this tape after 24 hours.
Do you still have that corners come off, take a clear photo and email it to us with the issue. Never pull the tank pad off, because then it can no longer be used.
Fits on the following motorcycle:
BMW | S1000RR | From 2009 | |