Tankpad Yamaha black / gold

Tankpad Yamaha black / gold

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Tank pad Yamaha black / gold from MotoGrafix has an excellent finish in special 3D gel (does not yellow) and a beautiful design. Height is 220mm and width is 170mm. It is a beautiful eye-catcher for your motorcycle, while it immediately protects the paint of the tank against scratches from your motorcycle pants or motorcycle jacket.

Apply tank pad

For a good sticking result (applies to every sticker) you must ensure that the room is at least 15 degrees and not humid (as is often the case in a shed or garage). For example, if you place the tank in your living room to warm up, leave it for at least 1 day since you will initially get condensation and that will take a while to evaporate.

If the tank pad is stuck on a curve, heat the tank suit with a blow dryer if necessary after sticking. If necessary, tape the corners well with adhesive tape for 24 hours, so that the glue has a chance to adhere properly. Remove this tape after 24 hours.

Do you still have corners coming loose, take a clear photo and email us with the issue. Never pull off the tank pad, because then it can no longer be used.