Tankpad Yamaha Speed carbon-look
The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English. Tank pad for your Yamaha motorcycle. In carbon look and with Yamaha lettering. Tank pad is thick (3D) and provides protection against scratches on your tank from your motorcycle pants or motorcycle jacket.
Tank pad dimensions are 143x210mm, thickness is 1.5mm.
Installing the tank pad
For a good adhesive result (applies to every sticker), make sure that the room is at least 15 degrees and not damp (as often in a shed or garage). For example, if you put the tank in your living room to heat up, leave it for at least 1 day since you will initially get condensation and that takes a while to evaporate.
If the tank pad is glued on a curvature, possibly heat the tank suit with a hair dryer after gluing. If necessary, glue the corners well with adhesive tape for 24 hours, so that the glue has the opportunity to adhere well. Remove this tape after 24 hours.
If you do let go of corners, take a clear photo and email us with the issue. Never pull off the tank pad, because then it can no longer be used.
in stock
