Brake disc left of NGK

Brake disc left with extra filtering on the brand NGK

NGK

NGK is a manufacturer of spark plugs specifically for the motorcycle with proven quality from racing. It is the most commonly used factory spark plug and is also known for its long service life. Incidentally, this spark plug should be checked with a major service and replaced if necessary. No matter how small the spark plug is, it is a very important part for your motorcycle. A good spark from a spark plug ensures that you get optimal combustion of your petrol mixture and therefore more power and less soot deposits in the motorcycle itself. A minimal check of the condition of your spark plug per season is definitely recommended (and is naturally done if you have a major service carried out).

Install NGK motorcycle spark plugs

Installing spark plugs is in itself a job that you can easily do yourself. Being able to access it is often the biggest challenge and sometimes parts of your motorcycle (fairings) must first be dismantled. Before you change the spark plugs, you must first spray everything around the old spark plugs clean with a compressor (or bicycle pump), so that no dirt can enter the cylinder. If you don't have a compressor, you can use a bicycle pump. A special wrench is required for loosening and tightening spark plugs. These are often equipped with a rubber ring to easily pull the spark plug out of the shaft. We can also supply these spark plug wrenches for you. Selecting the right spark plug wrench is very easy. The first letter of the spark plug type determines the size.

Find the right spark plug for your motorcycle:

You can use the selector to find the right spark plug for your motorcycle. If you cannot find your motorcycle in our database, you can always search with the selector of NGK itself. If you are unsure about which spark plug is suitable for your motorcycle, you can always handlebar us an e-mail and we will provide you with advice.

Brake disc left

A good brake disc for the left front brake is a very important part of the safety on your motorcycle. That is why we have chosen the renowned Ferodo brand. Ferodo is a manufacturer of brake discs for motorcycles and is also used in racing.

Replacing the brake disc

Replacing a brake disc is a job that can be done with little technical knowledge, but it should be done carefully since it concerns the brake on your motorcycle. Use the correct tools for this. In addition, it is VERY IMPORTANT that everything is properly tightened and tightened to the torques (Nm) specified by the manufacturer. So when in doubt, it is always advisable to have it installed at a motorcycle shop. The advice is to lubricate the screws with which the disc brake is fixed with something ceramic grease to prevent these screws from seizing.

Find the right brake disc on the left side

To find the right disc brake that is suitable for your motorcycle, you can use the selector to search in our webshop. If no brake disc is found there, you can also search directly in the Ferodo database. You can then find the right brake disc in our webshop based on the type number.