Progressive frontfork spring motorcycle of NGK

Progressive frontfork spring motorcycle with extra filtering on the brand NGK

NGK

NGK is a manufacturer of spark plugs specifically for the motorcycle with proven quality from racing. It is the most commonly used factory spark plug and is also known for its long service life. Incidentally, this spark plug should be checked with a major service and replaced if necessary. No matter how small the spark plug is, it is a very important part for your motorcycle. A good spark from a spark plug ensures that you get optimal combustion of your petrol mixture and therefore more power and less soot deposits in the motorcycle itself. A minimal check of the condition of your spark plug per season is definitely recommended (and is naturally done if you have a major service carried out).

Install NGK motorcycle spark plugs

Installing spark plugs is in itself a job that you can easily do yourself. Being able to access it is often the biggest challenge and sometimes parts of your motorcycle (fairings) must first be dismantled. Before you change the spark plugs, you must first spray everything around the old spark plugs clean with a compressor (or bicycle pump), so that no dirt can enter the cylinder. If you don't have a compressor, you can use a bicycle pump. A special wrench is required for loosening and tightening spark plugs. These are often equipped with a rubber ring to easily pull the spark plug out of the shaft. We can also supply these spark plug wrenches for you. Selecting the right spark plug wrench is very easy. The first letter of the spark plug type determines the size.

Find the right spark plug for your motorcycle:

You can use the selector to find the right spark plug for your motorcycle. If you cannot find your motorcycle in our database, you can always search with the selector of NGK itself. If you are unsure about which spark plug is suitable for your motorcycle, you can always handlebar us an e-mail and we will provide you with advice.

Progressive frontfork spring motorcycle

Front fork suspension standard factory-most motorcycle manufacturers is usually too soft, allowing them to tip at higher loads. This can, for example, riding with a passenger on your motorcycle, but also in mountain roads (downhill and brakes). In order to ensure a better behavior spring, the springs can be replaced by the original suspension of the German firm Wilber. Wilvers springs are known for their excellent features and use of high quality materials.

Progressive Suspension:

Pogressieve front fork suspension is suspension that gives more pressure to the extent there is put more power. Thus, so much the more the spring is pressed, so much the more the spring is tightened. This is taken as the best alternative by most motorcyclists.

Linear Suspension:

Linear front fork suspension is suspension that gives evenly pressure to that extent is pressed.

Finding suspension for your motorcycle

Via the selector, you can easily find out which progressive or leniaire Wilbers suspension is suitable for your motorcycle. If you have any doubt whether the suspension fits for your bike, you can always send an email. We will then advise on the suspension that you can take if necessary.