Brakepads motorcycle front of BMC

Brakepads motorcycle front with extra filtering on the brand BMC

BMC

With a BMC air filter is a wise choice for your motorcycle. Placing a BMC air filter is simple: remove the original old paper air filter and replace it with the BMC air filter. No modifications to your bike are also needed.

Benefits BMC air filters:

• Better air flow through the larger surface
• Filter material is cotton (original paper)
• Longer life
• Filter can be cleaned and reused (filter lasts longer than the motorcycle, so it never buy a new one)
• Because of the shape of the pressure drop the air passage is reduced to a minimum

Mounting BMC on your motorcycle:

The installation of a BMC air filter on your motorcycle with little technical knowledge.It is a matter of swapping out the original air filter at a BMC air filter. Most of the work will sit before removal and installation of other things to get to the air filter. If you are unfamiliar with this, it earned the recommendation to use technical documentation such as a workshop manual.

Please note that the air filter has been oiled and it is not necessary to address the first spray and is immediately ready for use.

Brakepads motorcycle front

Good front brakes are a very important part of the safety on your motorcycle. That is why we have chosen the renowned Ferodo brand. Ferodo is a manufacturer of brake pads for motorcycles and is also used in racing. Through years of experience, an excellent mix has been found between good braking power and service life, especially with the sintered brake pads.

Replacing brake pads

Replacing brake pads is a job that can be done with little technical knowledge, but it must be done carefully. Use the correct tools for this. In addition, it is VERY IMPORTANT that everything is properly tightened and tightened to the torques (Nm) specified by the manufacturer. So when in doubt, it is always advisable to have it installed at a motorcycle shop.

Correct front brake pads

There are mainly 2 types of front brake pads for street use, namely organic and sintered pads. The organic brake pads have a longer service life, but provide less braking power. The sintered brake pads form a good combination between service life and braking power. For normal street use, the sintered brake pads are therefore recommended for use with the front brake.

To find brake pads that are suitable for your motorcycle, you can use the selector to search our webshop. If no brake pad is found there, you can also search directly in the Ferodo database. You can then find the right brake pads in our webshop based on the type number.