|
|
Not recommended, especially due to the poor handling of a problem. After assembly, all four carburetors were found to be leaking. After disassembly and the necessary search, this turned out to be due to improperly formed rubber tips of the new float needles from this set. In the end I put the old float needles back, but in the new float needle seats from this set. This solved the problem completely. The handling from MPartz then went very stiff and unwilling. They only wanted to help if I returned a full set, which meant I had to completely disassemble everything again to be able to return the non-defective parts as well. As far as I'm concerned, this says enough about MPartz, so I won't order here again. Response mPartz: The customer has requested to investigate why the float chamber continued to overflow and whether this could possibly be due to the needle or float needle seat. That means that 4 sets have an issue and then you normally have to deal with a production error. Something that should definitely be explored. Several sets from the same production were sold in the same period without any issues being reported. We also have the sets that we have tested in stock here. They also closed nicely. We indicated that the customer wanted to examine his sets, but for understandable reasons he did not want to remove the complete sets (or at least 1). We then indicated that we might only return the needles free of charge (because, according to the customer, they were not mounted), so that we could check whether there might be an issue with that. But the customer has not taken advantage of that. If the customer does not want to return anything, we cannot investigate this (can also be the float needle height, for example).
Applied / used on: Suzuki GSF1200 Bandit bouwjaar niet aangegeven |
|
|
|