|
|
<p> The m-Unit Blue from MotoGadget Switchbox is a push-button controlled unit and at the same time fuse box with many additional functions. Almost all devices can be controlled with this m-Unit Blue. The size is the size of a pack of cigarettes (101 x 61 x 28 mm). The housing is protected against moisture, heat and vibrations. </p><p> The special thing about the m-Unit Blue is that it can be connected via BlueTooth to your Smartphone with the m-Ride app (for Android via Google Play and iPhone on iTunes). This allows you to easily adjust the setup, fault diagnosis if a fuse blows out, alarm setting etc. However the Smartphone can also be used for an encrypted Keyless Go. If you come around with your Smartphone, the unit is activated (however, nothing is visible from the outside).If you click once on the start button of your motorcycle, the power is switched on (as if you put the motorcycle on contact) and you press start again, the motorcycle is started. The power supply remains active even if your phone is no longer within reach. For restarting after switching off, the Smartphone is needed again. In addition, the app also provides insight into rice statistics. </p><p> The idea behind this switch box is that you can control large users with very thin wires by the relay function in the m-Unit Blue. This applies, for example, if you want the wiring to run through the wheel and then the chances are very small that you can do that with normal wire. You can then use very thin wires that can easily go through the wheel.</p><p> <strong>Has the following functions (digitally controlled):</strong> </p><ul><li> Total 11 outputs to switch components </li><li> Switching light (off, low beam and high beam with 1 button) </li><li> To replace the standard fuse box (old you can remove) </li><li> Flashing relay (power independent, so suitable for normal as well as LED indicator lights). Automatic shutdown is adjustable. </li><li> Integrated brake light modulator (to flash tail light during braking), </li><li> Integrated start relay. Switch smart control on and off when starting. </li><li> Relay for control of horn </li><li> AUX1 and AUX2 connection for connecting other components to your motor.</li><li> Simple shock alarm built-in </li><li> Possibility for "Hazard warning light switching" </li><li> Self-diagnosis of cabling (short circuit etc.) </li><li> Simple setup with 1 button </li></ul><p> With all these functions you no longer need additional relays, switches or fuse boxes. This allows you to keep your own cabling to a minimum. can be switched with very thin wires (this makes it easy to move the handlebars). </p><h2> Installation MotoGadget m-Unit Blue </h2><p> ATTENTION: knowledge of motor electronics is necessary for the installation of m-Unit Blue. It is a very comprehensive and handy unit, but do not underestimate the job. We have experience with the unit, so if you have any questions during the installation you can always contact us.</p>
Applied / used on: Kawasaki Z1000 bouwjaar 2004 |
|
|
|