Progressieve frontvering BMW R1200 HP2 HP 2 Enduro 05-
- Ask a question
- Send email when item is available
Progressieve frontvering BMW R1200 HP2 HP 2 Enduro 05-
Fits on the following motorcycle:
BMW | R1200 HP2 |
| |||
Product is suitable for the BMW R1200 HP2 (check year from the R1200 HP2 below in the motorcycle-list). Standard front suspension of motorcycles is known to be too soft at the factory. This means that when the front fork is loaded, it can cause the front fork to tip through. To prevent this, the original springs in the front fork of your motorcycle can be replaced with progressive suspension ProMoto from the well-known German brand Wilbers. Progressive suspension means that the suspension becomes more rigid as it is pushed further. This prevents undesired spreading of the suspension.
Specifications:
- Suitable for: BMW HP 2 Enduro year range 05-
- Required oil: 7.5 (1 L) (= viscosity and number of liters needed)
- Height of air chamber: 100mm *
- Type: Progressive suspension
- Manufacturer's note: Standard height and Lowering for 50 mm
Note: is delivered without oil.See article below to order with the viscosity as indicated.
* = The air chamber is measured with the front fork fully-insulated and without front fork springs.