Progressieve frontvering BMW R1200 HP2 Megamoto 2008-2011
- Ask a question
- Send email when item is available
Progressieve frontvering BMW R1200 HP2 Megamoto 2008-2011
Fits on the following motorcycle:
BMW | R1200 HP2 Megamoto |
| |||
The standard front fork suspension of your BMW R1200 HP2 (check year and model-info from the R1200 HP2 below in the motorcycle-list) is known to be too soft from the factory. This can lead to the front fork breaking through at a higher load on the front fork. To prevent this, the original springs in the front fork of your motorcycle can be replaced by progressive suspension ProMoto from the well-known German brand Wilbers. Progressive suspension means that the suspension gets stiffer the further it is compressed. This prevents unwanted deflection of the suspension.
Specifications:
- Fits: BMW HP2 Megamoto year 08-
- Required oil (not included): 7.5 (2 L) (= viscosity and number of liters required)
- Air chamber height: 175mm*
- Type: Progressive suspension
Note: Supplied without oil. See recommended article on this page to order it with the viscosity as indicated.
* = The air chamber is measured with the front fork fully compressed and without the front fork springs.