Progressieve frontvering Ducati Hypermotard 1100 2007-2012
- Ask a question
- Send email when item is available
Progressieve frontvering Ducati Hypermotard 1100 2007-2012
Fits on the following motorcycle:
Ducati | Hypermotard 1100 |
| |||
The standard front fork suspension of your Ducati Hypermotard 1100 (check year from the Hypermotard 1100 or select a year: below in the motorcycle-list) is known to be too soft from the factory. This can lead to the front fork breaking through at a higher load on the front fork. To prevent this, the original springs in the front fork of your motorcycle can be replaced by progressive suspension ProMoto from the well-known German brand Wilbers. Progressive suspension means that the suspension gets stiffer the further it is compressed. This prevents unwanted deflection of the suspension.
Specifications:
- Fits: Ducati Hypermotard 1100 year 07-
- Required oil (not included): 7.5 (2 L) (= viscosity and number of liters required)
- Air chamber height: 70mm*
- Type: Progressive suspension
- Manufacturer's note: For lowering
Note: Supplied without oil. See recommended article on this page to order it with the viscosity as indicated.
* = The air chamber is measured with the front fork fully compressed and without the front fork springs.