Resistors cable LED indicators 5-10W
- Ask a question
- Barcode manufacturer: 4054783026425, 4251352603166, 4251352603333, 4043981037623
Resistors cable LED indicators 5-10W
Resistance cable for LED indicators on your motorcycle (2 pieces). If your turn signals flash too quickly when they have been replaced by LED turn signals, you can simply use this cable. This cable is suitable for simulating the consumption of a 10W lamp in combination with the LED flashing lights. The power consumption of the resistors themselves is 5W. The LED turn signals themselves have to absorb a power of about 3W. If the LED turn signals are of a lower wattage, they will still flash too quickly. Which resistors (this one or the heavier one) you need depends on the Wattage of the original lamp.
This is a set of 2 pieces (1x left and 1x right. If required at the front and rear, order 2x).
PLEASE NOTE: if you have a total of 4 LED flashing lights on your motorcycle, it is better to take 1x resistors 21-23W and connect them, for example, only to the rear flashing lights. Then you don't need resistors anymore. This tip is NOT applicable to motorcycles with CanBus.
Reviews (84)
We guarantee the authenticity of the reviews because only customers who have actually bought the product can write a review.
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||