Tankpad Spider Black

Tankpad Spider Black

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Tank pad for your motorcycle, type Spider. Color is black. Tank pad is thick (3D) and provides protection against scratches on your tank of your motorcycle pants or motorcycle jacket. The small left and right blocks are loose and may not need to be used.

Dimensions of the tank pad are 140x205mm, width at the bottom is 80mm.

Apply tank pad

For a good adhesive result (applies to every sticker) you must ensure that the room is at least 15 degrees and not damp (as is often the case in a shed or garage). For example, if you put the tank in your living room to heat up, leave it for at least 1 day as you will initially get condensation and that takes a while to evaporate.

If the tank pad is glued to a curve, heat the tank suit with a hair dryer after gluing it. If necessary, secure the corners with adhesive tape for 24 hours, so that the glue has a chance to adhere well. Remove this tape after 24 hours.

Do you still have that corners let go, take a clear photo and email us with the issue. Never pull off the tank pad, otherwise it can no longer be used.