Tankpad Wave carbon-look

Tankpad Wave carbon-look

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Tank pad for your motorcycle, type Wave. This one is in carbon look. Tank pad is thick (3D) and provides protection against scratches on your tank of your motorcycle pants or motorcycle jacket.

Dimensions of the tank pad are 200x120mm.

Apply tank pad

For a good adhesive result (applies to every sticker) you must ensure that the room is at least 15 degrees and not damp (as is often the case in a shed or garage). For example, if you put the tank in your living room to heat up, leave it for at least 1 day as you will initially get condensation and that takes a while to evaporate.

If the tank pad is stuck on a curvature, heat the tank suit with af hn after gluing. If necessary, tape the corners tightly with adhesive tape for 24 hours, so that the glue has a chance to adhere well. Remove this tape after 24 hours.

Do you still have that corners let go, take a clear photo and email us with the issue. Never pull off the tank pad, otherwise it can no longer be used.