Brakepads motorcycle rear of NGK

Brakepads motorcycle rear with extra filtering on the brand NGK

NGK

NGK is a manufacturer of spark plugs specifically for the motorcycle with proven quality from racing. It is the most commonly used factory spark plug and is also known for its long service life. Incidentally, this spark plug should be checked with a major service and replaced if necessary. No matter how small the spark plug is, it is a very important part for your motorcycle. A good spark from a spark plug ensures that you get optimal combustion of your petrol mixture and therefore more power and less soot deposits in the motorcycle itself. A minimal check of the condition of your spark plug per season is definitely recommended (and is naturally done if you have a major service carried out).

Install NGK motorcycle spark plugs

Installing spark plugs is in itself a job that you can easily do yourself. Being able to access it is often the biggest challenge and sometimes parts of your motorcycle (fairings) must first be dismantled. Before you change the spark plugs, you must first spray everything around the old spark plugs clean with a compressor (or bicycle pump), so that no dirt can enter the cylinder. If you don't have a compressor, you can use a bicycle pump. A special wrench is required for loosening and tightening spark plugs. These are often equipped with a rubber ring to easily pull the spark plug out of the shaft. We can also supply these spark plug wrenches for you. Selecting the right spark plug wrench is very easy. The first letter of the spark plug type determines the size.

Find the right spark plug for your motorcycle:

You can use the selector to find the right spark plug for your motorcycle. If you cannot find your motorcycle in our database, you can always search with the selector of NGK itself. If you are unsure about which spark plug is suitable for your motorcycle, you can always handlebar us an e-mail and we will provide you with advice.

Brakepads motorcycle rear

Good rear brakes are a very important part of the safety on your motorcycle. That is why we have chosen the renowned Ferodo brand. Ferodo is a manufacturer of brake pads for motorcycles and is also used in racing. Through years of experience, an excellent mix has been found between good braking power and service life, especially with the sintered brake pads.

Replacing brake pads

Replacing brake pads is a job that can be done with little technical knowledge, but it must be done carefully. Use the correct tools for this. In addition, it is VERY IMPORTANT that everything is properly tightened and tightened to the torques (Nm) specified by the manufacturer. So when in doubt, it is always advisable to have it installed at a motorcycle shop.

Correct rear brake pads

There are mainly 2 types of rear brake pads for street use, namely organic and sintered pads. The organic brake pads have a longer service life, but provide less braking power. The sintered brake pads form a good combination between service life and braking power. For normal street use, the sintered brake pads are therefore recommended for use with the rear brake.

To find brake pads that are suitable for your motorcycle, you can use the selector to search our webshop. If no brake pad is found there, you can also search directly in the Ferodo database. You can then find the right brake pads in our webshop based on the type number.