Displaying 41 to 50 (of 53 reviews) |
Result Pages: |
|
|
|
|
|
|
Fine, quickly got what I needed |
|
|
|
|
|
|
|
|
|
highly recommended, a world of difference compared to the original. |
|
|
|
|
|
|
|
|
|
well and neatly delivered good product !! |
|
|
|
|
|
|
|
|
|
neatly delivered good product pity were no stickers on to the front fork |
|
|
|
|
|
|
|
|
|
Good set of springs in the assembly to use the old spacer on top of the round buus not much longer because these springs are a good upgrade |
|
|
|
|
|
|
|
|
|
My experience with mPartz is very good like the stuff is delivered quickly Then I had some questions that were also super quick reply |
|
|
|
|
|
|
|
|
|
With this suspension in your SV is your motorcycle no longer recognizable back. You will receive in dynamics much better feedback from your motorcycle! The standard front suspension of the SVs are rather weak. This in! A lot stiffer that runs really better! Really recommended! |
|
|
|
|
|
|
|
|
|
I have 4 years driven the original suspension and tried many different setups terms of institutions, spring preload, compression and rebound damping, but never really satisfied. After installing this spring I noticed quite a difference immediately, sends much sharper, easier going through the bends and does not deviate from the line in it. I have yet to experiment with the in and rebound to get an ideal setup for me. The mounting've done myself because I had done that before in another motorcycle was just that no upside / down forks, luckily I had there the manual and I could do the job by itself to make a spring compressor ... beware! this is not just as a job, if you are not sure, I suggest you leave this by a fitter. |
|
|
|
|
|
|
|
|
|
Good order and helped with my questions and quick delivery. |
|
|
|
|
|
|
|
|
|
Delivery as stated good quality product. |
|
|
|
|
|
Displaying 41 to 50 (of 53 reviews) |
Result Pages: |
|
|