Tankpad Fox carbon-look
- Ask a question
- Send email when item is available
Tankpad Fox carbon-look
Tank pad for your motorcycle, type fox. This one has a carbon look. Tank pad is thick (3D) and provides protection against scratches on your tank from your motorcycle pants or motorcycle jacket.
Dimensions of the tank pad are 200x190mm.
Applying tank pad
For a good adhesive result (applies to every sticker), you must ensure that the room is at least 15 degrees and not damp (as is often the case in a shed or garage). For example, if you put the tank in your living room to warm up, leave it for at least 1 day since you initially get condensation and that needs a while to evaporate.
If the tank pad is glued on a curve, heat the tank suit with a hair dryer after sticking. If necessary, stick the corners well with adhesive tape for 24 hours, so that the glue has a chance to adhere well. Remove this tape after 24 hours.
If you still have that corners coming loose, take a clear photo and email it to us with the issue. Never pull the tank pad off, because then it can no longer be used.