Tankpad Suzuki white / blue
- Ask a question
- Send email when item is available
- Barcode manufacturer: TS001
Tankpad Suzuki white / blue
Tank pad Suzuki white / blue from MotoGrafix has an excellent finish in special 3D gel (does not yellow) and a beautiful design. Height is 220mm and width is 170mm. It is a nice eye-catcher for your motorcycle, while it immediately protects the paint of the tank well against scratches from your motorcycle pants or motorcycle jacket.
Apply tank pad
For a good adhesive result (applies to every sticker) you must ensure that the room is at least 15 degrees and not damp (as is often the case in a shed or garage). For example, if you put the tank in your living room to warm up, leave it for at least 1 day as you will initially get condensation and that takes a while to evaporate.
If the tank pad is stuck on a curvature, heat the tank suit with af hn after gluing. If necessary, tape the corners tightly with adhesive tape for 24 hours, so that the glue has a chance to adhere well. Remove this tape after 24 hours.
Do you still have that corners let go, take a clear photo and email us with the issue. Never pull off the tank pad, otherwise it can no longer be used.