Tankpad Yamaha Tracer 900 red/black
- Ask a question
- Send email when item is available
- Barcode manufacturer: TY021RK
Tankpad Yamaha Tracer 900 red/black
Fits on the following motorcycle:
Yamaha | Tracer 900 |
| |||
Product is suitable for the Yamaha Tracer 900 (check year from the Tracer 900 below in the motorcycle-list). Tank pad Yamaha Tracer 900 black/red from MotoGrafix has an excellent finish in special 3D gel (does not yellow) and a beautiful design. Height is 220mm and width is 170mm. It is a nice eye-catcher for your motorcycle, while it also protects the paint of the tank against scratches from your motorcycle pants or motorcycle jacket.
Applying tank pad
For a good adhesive result (applies to every sticker), you must ensure that the room is at least 15 degrees and not humid (as is often the case in a shed or garage). For example, if you place the tank in your living room to warm up, leave it for at least 1 day as you will initially get condensation and it will take some time to evaporate.
If the tank pad is stuck on a curve, heat the tank pad with a hair dryer after sticking. If necessary, secure the corners with adhesive tape for 24 hours, so that the glue has a chance to adhere properly. Remove this tape after 24 hours.
If you have any loosening of the corners, take a clear photo and email it to us with the issue. Never pull off the tank pad, otherwise it can no longer be used.