Displaying 61 to 70 (of 17464 reviews) |
Result Pages: |
|
|
Brakelight Givi V47N by Hayk Vxx xxxxxxx (automatically translated from Dutch) |
Date Added: Friday 15 March, 2024 |
|
|
|
|
Installation kit for Givi top case V47. works fine, just a bit difficult and unclear description. |
|
|
|
|
|
|
|
|
|
Super satisfied, good product and arrived very quickly. Great for your company.????
Applied / used on: Kawasaki ZX-7R bouwjaar niet aangegeven |
|
|
|
|
|
Airfilter HiFlo HFA7914 by Rick Hxxxxxxx (automatically translated from Dutch) |
Date Added: Wednesday 13 March, 2024 |
|
|
|
|
Ordered this item together with all oils and filters for the annual service R1200GSA, has been going well for years, fast service, top
Applied / used on: BMW R1200GS bouwjaar 2010 |
|
|
|
|
|
|
|
|
|
I read somewhere (I can't remember where) that it would also fit a 1 inch handlebar. So that's why I bought it. It indeed also fits on the handle of my VN1600. The disadvantage is that you have less room for your hand on the throttle. Have yet to try it in practice. Three stars partly because almost 25.00 is quite a lot of money for a simple piece of plastic. |
|
|
|
|
|
Cruise Control by Wendy Mxxxxx (automatically translated from Dutch) |
Date Added: Wednesday 13 March, 2024 |
|
|
|
|
It takes some getting used to, but for long distances it is nice not to have to keep the gas open. Works on my 1150gs with handguards and the Oxford Touring Pro heated grips.
Applied / used on: BMW R1150GS bouwjaar 2000 |
|
|
|
|
|
|
|
|
|
Breaks too quickly when tightening, despite the torque wrench. Response from mPartz: It is important to adhere to the tightening torque of 12Nm (see description) and not the tightening torque of the original drain plug since it is a hollow aluminum drain screw. Clamping is done by the supplied sealing ring. |
|
|
|
|
|
|
|
|
|
It's not worth it. The one I had was defective. Both said there was no dot 4 through it, which caused pressure to build up and the tube to fall off, covering everything. Snakes were also very short for beauty. All in all, just buying a transparent tube of half a meter would be more useful. Response from mPartz: The mechanical part works with a fairly strong spring that presses against the ball. This is also necessary because the brake pump puts a lot of pressure. The arrow on the bleeder must point away from the brake caliper. It is important to place the hose sufficiently over the bleed nipple and use the clamps supplied. This prevents the vent hose from popping off. |
|
|
|
|
|
|
|
|
|
Ideal for making a switched 12v connection, without having to connect to existing cabling |
|
|
|
|
|
|
|
|
|
about 4cm seam was loose Response mPartz: That is not the intention. Just let us know if you would like to receive a new one. |
|
|
|
|
|
Oil filter wrench by Remon Vxxxxxxx (automatically translated from Dutch) |
Date Added: Monday 11 March, 2024 |
|
|
|
|
Exactly as described, this type of cap for my type of oil filter. Only downside to the 3/8 connection, which meant I first had to get an adapter to my 1/2 tool set. For the rest, neatly packaged and delivered quickly. |
|
|
|
|
|
Displaying 61 to 70 (of 17464 reviews) |
Result Pages: |
|
|