Displaying 51 to 60 (of 188 reviews) |
Result Pages: |
|
|
|
|
|
|
Packaging is only a very small piece off the brake lining. According to the mechanic it was not a problem, but for such brake pads do not last neat. Brake pads work well. MPartz response: Unfortunately, it is a known problem with Ferodo brake pads and we give it as a warning in advance when handlebaring. Ferodo uses plastic that is too hard and too thin, causing it to break very quickly. |
|
|
|
|
|
|
|
|
|
Was indicated as a plug for ST1300, but it does not fit on a St1300 2002 Response mPartz: We do not give motor advice for these drain plugs (see also fit advice in the description).
Applied / used on: bouwjaar niet aangegeven |
|
|
|
|
|
Caos mirror black plastic by Maarten Hxxxxxxxxxxx (automatically translated from Dutch) |
Date Added: Tuesday 16 February, 2021 |
|
|
|
|
The caps did not fit. I had ordered an extra set, and I had to use this to get them to fit. I had to cut the caps to fit them. Result that 1 cap is not quite as desired and 1 set I was able to throw away as I did not fit them normally. So not completely satisfied with the product. |
|
|
|
|
|
Oil filter wrench by Kay Dx xxxxx (automatically translated from Dutch) |
Date Added: Friday 12 February, 2021 |
|
|
|
|
Probably too small a hole. I turned the oil filter right through. |
|
|
|
|
|
|
|
|
|
No letterbox packaging indicated, nothing participated. Very unfortunate Reaction mPartz: We do not handlebar lights of this large as letterbox mail, because the chance is too great that they will break (envelope offers hardly any / no protection). |
|
|
|
|
|
|
|
|
|
Unfortunately, I also do not get the flashing led light to flash with this mPartz Response: Then there seems to be something wrong with the cabling (so that it also did not flash with the old relay). |
|
|
|
|
|
|
|
|
|
The original battery clamps / eyes on the Honda CB1000R have to be removed a bit, so the battery cannot be mounted directly. The battery poles are better positioned on an original YUASA. Response mPartz: After our inquiry, we received a clear explanation of the issue. The rectangular eyelet of the power cable just fits the Yuasa, but not the Nitro. Alternatively, you could bend the end and do not have to shorten it. Optionally, you could turn the eye 90 degrees for mounting, but then there must be room for cable next to the battery. Something to take into account when purchasing and to choose the Yuasa.
Applied / used on: Honda CB1000R bouwjaar niet aangegeven |
|
|
|
|
|
Cruise Control by P Cxxxxxxxxxx (automatically translated from Dutch) |
Date Added: Monday 21 September, 2020 |
|
|
|
Battery Yuasa YTX9-BS by Ed Vxxxx (automatically translated from Dutch) |
Date Added: Sunday 13 September, 2020 |
|
|
|
|
Miss of the top shelf. Wrong brand of battery sent. Mail sent and finally neatly resolved overpaid converted to - / - amount to next order. Making mistakes is human. So just stay a customer. A point of attention! |
|
|
|
|
|
|
|
|
|
Am not so happy with leaks on both sides! Unfortunately have to buy another Reaction mPartz: It is important to check the connection nipple on both sides and tighten it carefully. This has a very fine thread and when tightened it is not twisted in it. In case of a persistent problem, it will of course be replaced free of charge.
Applied / used on: Honda CBR600F bouwjaar niet aangegeven |
|
|
|
|
|
Displaying 51 to 60 (of 188 reviews) |
Result Pages: |
|
|